How to quickly fit a Waste Force disposal unit

My new Waste Force install was a breeze using the quick fit 1/8 turn connector.  The plumbing configuration is quite hard to imagine since it is 3D until you see it done, so here is.  Quite simple just use a 1x adjustable p trap, 1 x tee and 2 x 90 elbows along with any extra waste pipe as needed.  I find that using the McAlpine compression fittings with 40mm standard kitchen sink waste pipe are best since the double tubular construction of the fittings gives a very rigid structure to help support the waste disposer which is hanging off the since and will vibrate when in use unless held firmly in place.  This is for a one and a half bowel sink.